GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 70)

GDS-1000A-U Programming Manual
70
Save/Recall Command
:MEMory<X>:RECall:SETup ........................................ 70
:MEMory<X>:RECall:WAVeform ................................. 70
:MEMory<X>:SAVe:SETup .......................................... 71
:MEMory<X>:SAVe:WAVeform ................................... 71
*RCL ............................................................................. 72
:REF<X>:DISPlay ......................................................... 72
:REF<X>:LOCate .......................................................... 73
:REF<X>:SAVe .............................................................. 73
*SAV ............................................................................. 74
:MEMory<X>:RECall:SETup
Set
Description Recalls a panel setting from the internal memory.
Same as: Save/Recall key (recall) → F3
Syntax < Long > < Short >
:memory<x>:recall:setup :mem<x>:rec:set
Parameter <X> Internal memory
1 ~ 15 S1 ~ S15
Example :memory1:recall:setup Recalls the settings from
the internal memory S1
:MEMory<X>:RECall:WAVeform
Set
Description Recalls a waveform from the internal memory and
saves it to a reference waveform.
Same as: Save/Recall key (recall) → F4
Syntax < Long > < Short >
:memory<x>:recall:waveform
<NR1> :mem<x>:rec:wav
<NR1>
Parameter <X> Internal memory