GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 29)

COMMAND DETAILS
29
:CHANnel<X>:PROBe:RATio
Set
Query
Description Sets or returns the probe attenuation factor.
Same as: Channel key → variable knob
Syntax < Long > < Short >
:channel<X>:probe:ratio<NRf>
<NRf>
:channel<X>:probe:ratio? :chan<X>:prob:rat
<NRf>
:chan<X>:prob:rat?
Parameter <X> Channel <NRf> Probe
attenuation
factor
1/2 CH1/2 0.1/0.2/0.5 0.1x/0.2x/0.5x
1/2/5 1x/2x/5x
10/20/50 10x/20x/50x
100/200/500 100x/200x/500x
1000/2000 1000x/2000x
Example :channel1:probe:ratio 1 Sets the Channel 1
probe attenuation
factor to 1x
:CHANnel<X>:PROBe:TYPE
Set
Query
Description Sets or returns the probe type (voltage/current).
Same as: Channel key →F4
Syntax < Long > < Short >
:channel<X>:probe:type
<boolean>
:channel<X>:probe:type? :chan<X>:prob:type
<boolean>
:chan<X>:prob:type?