GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 30)

GDS-1000A-U Programming Manual
30
Parameter <X> Channel <boolean> Probe type
1/2 CH1/2 0 Voltage
1 Current
Example :channel1:probe:type 1 Sets the Channel 1
probe type to
Current.
:CHANnel<X>:SCALe
Set
Query
Description Sets or returns the vertical scale. The scale depends
on the probe attenuation factor.
Same as: Volts/Div knob
Syntax < Long > < Short >
:channel<X>:scale <NR3>
:channel<X>:scale? :chan<X>:scal <NR3>
:chan<X>:scal?
Parameter <X> Channel <NR3> Vertical scale
1/2 CH1/2 2e–3 ~ 5e+0 2mV ~ 10V
(Probe x1)
2e–2 ~ 1e+2 20mV ~ 100V
(Probe x10)
2e–1 ~ 1e+3 200mV ~ 1000V
(Probe x100)
Example :channel1:probe 0
:channel1:scale 2.00e–3 Sets the Channel 1 probe
attenuation factor to x1
Sets the Channel 1
vertical scale to 2mV/div