GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 40)

GDS-1000A-U Programming Manual
40
Parameter <NR1> Display contrast
–10 ~ 10 Lowest (–10) to the Highest (+10)
Example :display:contrast 0 Sets the display
contrast to the middle
(±0)
:DISPlay:GRATicule
Set
Query
Description Sets or returns the display grid type.
Same as: Display key → F5
Syntax < Long > < Short >
:display:graticule <NR1>
:display:graticule? :disp:grat <NR1>
:disp:grat?
Parameter <NR1> Grid type <NR1> Grid type
0 Full mode 2 Frame mode
1 Cross mode
Example :display:graticule 0 Selects the full grid
:DISPlay:WAVeform
Set
Query
Description Sets or returns the display waveform type.
Same as: Display key → F1
Syntax < Long > < Short >
:display:waveform <NR1>
:display:waveform? :disp:wav <NR1>
:disp:wav?
Parameter <NR1> Display waveform type
0 Vectors
1 Dots
Example :display:waveform 0 Selects the vectors
waveform