GW Instek GDS-1000A-U Series Programming Manual - Manual (Page 28)

GDS-1000A-U Programming Manual
28
:channel<X>:math <NR1>
:channel<X>:math? :chan<X>:math <NR1>
:chan<X>:math?
Parameter <X> Channel <NR1> Math operation
1/2 CH1 or CH2 0 Math off
1 Add
2 Subtract
3 Multiply
4 FFT
5 FFTrms
Example1 :channel1:math 2 Channel 1 – Channel 2
Example2 :channel2:math 4 Runs FFT on Channel 2
:CHANnel<X>:OFFSet
Set
Query
Description Sets or returns the offset level for a channel. The
offset level range depends on the vertical scale.
Syntax < Long > < Short >
:channel<X>:offset <NR3>
:channel<X>:offset? :chan<X>:offs <NR3>
:chan<X>:offs?
Parameter <X> Channel <NR3> Offset level
1/2 CH1/2 ±0.5~
±5 ±0.5V ~ ±5V
(2mV/div~50mV/div)
±5.0~
±50 ±5.0V ~ ±50V
(100mV/div~500mV/div)
±50.0~
±300 ±50.0V ~ ±300V
(1V/div ~ 10V/div)
Example :channel1:scale 1.00e–2
:channel1:offset 2.00e–2 Sets the Channel 1
scale to 10mV/div
Sets the Channel 1
offset to 20mV