GW Instek GDS-3000 Series User Manual - Manual (Page 124)

GDS-3000 Series User Manual
124
Set the Deskew
Background The deskew function is used to compensate for the
propagation delay between the oscilloscope and
the probe.
Panel Operation 1. Press one of the Channel keys.
CH1
2. Press Probe from the bottom menu.
3. Press Deskew on the side menu and
use the variable knob to set the
deskew time.
Alternatively, press Set to 0s to
reset the deskew time.
Range -50ns~50ns, 10ps increments
4. Repeat the procedure for another channel if
necessary.