GW Instek GDS-3000 Series User Manual - Manual (Page 151)

SAVE/RECALL
151
Create/Edit file labels
Format Reference files and Setup files stored in internal
memory can have individual labels set. The labels
are used on the reference waveform and setup file
icons.
Panel Operation 1. Press the Save/Recall key from the
front panel.
Save/Recall
2. Press Edit File Label from the
bottom menu.
3. Press Label For to choose a
Reference or Setup file.
Label For Ref1~4, Set1~20
4. To choose a preset label, Press User
Preset from the side menu and
choose a label.
Labels ACK, AD0, ANALOG, BIT, CAS,
CLK, CLOCK, CLR, COUNT,
DATA, DTACK, ENABLE, HALT,
INT, IN, IRQ, LATCH, LOAD,
NMI
Edit Label 1. Press Edit Character to edit the
current label.