GW Instek GDS-3000 Series User Manual - Manual (Page 174)

GDS-3000 Series User Manual
174
P
RINT OUT
Screen images can be printed to some PictBridge compatible
printers using the USB device port. The GDS-3000 has a dedicated
Print/Save key for quick and easy printing. To reduce the amount
of printer ink used for each print, images can be printed using the
Ink Saver function.
Screen images can also be printed using the remote control
software, FreeWave, downloadable from the GWInstek website.
Printer I/O Configuration
Panel Operation 1. Connect a PictBridge printer to the
USB device port on the rear panel.
2. Press the Utility key.
Utility
3. Press I/O from the bottom menu.
4. Press USB Device Port from the side
menu and select Printer.