GW Instek GDS-3000 Series User Manual - Manual (Page 74)

GDS-3000 Series User Manual
74
Display All mode
Display All mode shows and updates all items from Voltage and
Time type measurements.
View
Measurement
Results 1. Press the Measure key.
Measure
2. Press Display All from the bottom
menu.
3. Choose a channel (CH1, CH2, CH3, CH4) from
the side menu to display auto measurement
items.
Note: only the channels that are activated are
available.
4. The results of Voltage and Time type
measurements appear on the display.
Remove
Measurements To remove the measurement results,
press OFF.