GW Instek GDS-3000 Series User Manual - Manual (Page 66)

GDS-3000 Series User Manual
66
Split Window Mode
The split window mode is able to display and trigger each active
channel independently. The split window mode is especially useful
for signal comparisons. Reference waveforms can also be used in
this mode. Most functions and features can be used with split
screen mode except for the Math, XY display and Zoom mode.
Enter Split Screen
Mode 1. Activate each channel that is
to be used in the split screen
mode.
CH1 CH1 à
page 57
2. Press the Split Window key
to enter the split screen
mode.
Split
Window
3. Split window mode appears. The number of
windows depends on the number of active
channels. 1-2 active channels will produce 2
split windows, while 3-4 active channels will
produce 4 split windows.
The split window that has the active channel is
shown with an orange border.
Example 4 channel split window
Active
window
2 channel split window
Active
window