GW Instek GDS-3000 Series User Manual - Manual (Page 131)

CONFIGURATION
131
Setup Holdoff Level
Background The holdoff function defines the waiting period
before the GDS-3000 starts triggering again after a
trigger point. The holdoff function ensures a stable
display if there are a number points in a periodic
waveform that can be triggered. Holdoff applies to
all the triggering types.
Holdoff time
Trigger point
Panel Operation 1. Press the trigger Menu key.
Menu
2. To set the Holdoff time, press the
Holdoff (or Mode/Holdoff) menu
button on the bottom bezel.
3. Use the side menu to set the
Holdoff time.
Range 10ns~10s
Pressing Set to Minimum sets the
Holdoff time to the minimum,
10ns.
Note: The holdoff function is automatically
disabled when the waveform update mode is
in roll mode (page114).