GW Instek GDS-3000 Series User Manual - Manual (Page 158)

GDS-3000 Series User Manual
158
Note
The file will not be saved if the
power is turned Off or the USB
drive is taken out before the
message ends.
USB File Utility To edit USB flash drive contents
(create/ delete/ rename files and
folders), press File Utilities. For details,
see page 166.
PC Software
(FreeWave) Saving waveforms can also be
accomplished using FreeWave,
downloadable from GWInstek
website.
Save Setup
Panel Operation 1. (For saving to an external
USB flash drive) Connect
the drive to the front or rear
panel USB port.
Note: Only one host
connection, front or rear, is
allowed at a time.
Front Rear
Host
2. Press the Save/Recall key from the
front panel.
Save/Recall
3. Press Save Setup from the bottom
menu.