GW Instek GDS-3000 Series User Manual - Manual (Page 160)

GDS-3000 Series User Manual
160
Recall
File Type/Source/Destination
Item Source Destination
Default Panel
Setup  Factory installed
setting  Current front panel
Reference
Waveform  Internal memory:
Ref1~4  Current front panel
Panel Setup
(DSxxxx.set)  Internal memory: S1 ~
S20
 File system: Disk, USB
 Current front panel
Waveform Data
(DSxxxx.lsf)
(CH1~CH4.lsf,
Ref1~Ref4.lsf,
Math.lsf)*  Internal memory: Wave
1 ~ Wave20
 File system: Disk, USB
 Reference waveform
1 ~ 4
*Recalled from ALLXXX directories.
Recall Default Panel Settings
Panel Operation 1. Press the Default Setup key.
Default
Setup
2. The screen will update with the default panel
settings.
Setting Contents The following is the default (factory) setting
contents.