AT&T EP5632/EP5632-2 - Manual (Page 14)

10
Getting started
Installation options
The telephone base comes with the mounting bracket already installed for
desktop use. If wall mounting is desired, a telephone outlet wall mounting
plate with mounting studs is required. This mounting plate with studs may be
available for purchase from any hardware or consumer electronics retailers
and may require professional installation.
Desktop to wall mount installation
To install the telephone base in the wall mount position, make sure that you
first unplug all cords connected to the telephone base before you begin.
Desktop position
1. Press on the tabs and
remove the bracket.
2. Rotate the bracket
to the wall mount
position, indicated by
the engravings.
3. Insert the center tabs
in first, then press the
bracket downwards until
the bracket clicks into
place and is secure.
Tabs
Wall mount position
Center tabs