AT&T EP5632/EP5632-2 - Manual (Page 56)

52
System setup
Number of Rings
By default, the answering system answers an
incoming
HOME call after four rings. You can set
the answering system to answer an incoming
HOME call after two, four, or six rings. You can
also select
Toll Saver (see below).
To set the number of rings:
1. Press the MENU softkey on the telephone base
to enter the main menu.
2. Press the UP and DOWN NavKeys to highlight
Answering System, then press the SELECT
softkey to enter the
Answering System menu.
3. Press the UP and DOWN NavKeys to highlight to highlight
Number of Rings, then press the SELECT
softkey. You can then select:
• Answer on 2 Rings - the answering system
answers the incoming call after two rings.
• Answer on 4 Rings - the answering system
answers the incoming call after four rings.
• Answer of 6 Rings - the answering system
answers the incoming call after six rings.
• Toll Saver - the answering system answers
a call after two rings when there are new
messages, and after four rings when there
are no new messages.
4. Press the UP and DOWN NavKeys to highlight
an option, then press the SET softkey to save
the setting.
NOTE: To stop the
answering system recording
an incoming caller at anytime,
press
HOME/
FLASH
or
SPEAKER on the handset, or
HOME on the telephone
base.
Main Menu
Directory
Call Log
Answering System
Select
Answering System
Announcement
Record Memo
Number of Rings
Select
Number of Rings
Answer on 2 Rings
P
Answer on 4 Rings
Answer on 6 Rings
Set