AT&T EP5632/EP5632-2 - Manual (Page 8)

4
Getting started
Handset status icons
REDIAL CALLER ID
HANDSET 1
1 2
12:00AM
Time - indicates the handset time.
New answering system message - alternates with the time when you
have a new answering system message.
New voice mail message - alternates with the time when you have a
new voice mail message.
HOME line - on steady when the HOME line is in use. Flashes slowly
when a
HOME call is on hold. Flashes rapidly when there is an incoming
HOME call.
CELLULAR (cell phones 1 or 2) - depending on which cell phone is
active, on steady when the
CELLULAR line is in use. Flashes slowly when
a CELLULAR call is on hold. Flashes rapidly when there is an incoming
CELLULAR call.
Bluetooth Active Devices - the telephone base is searching for the
Bluetooth device(s) on the
Active Devices list (page 27).
Connected Active Devices - indicates that the Bluetooth device 1 and/
or 2 are connected and on the
Active Devices list. On steady means that
the device is connected. Flashes when it is in the process of connecting
to the device.
Disconnected Active Devices - a line through the device number (1
and/or 2) indicates the device is disconnected from the telephone base.
Wireless Bluetooth headset - on steady when a Bluetooth headset is
in use on the
HOME line. Flashes when a connected Bluetooth headset
is available to answer an incoming HOME call.
Ringer off - on steady when the HOME, CELL1, and CELL2 ringers are
off. Flashes when one or two of the
HOME, CELL1, or CELL2 ringers
are off.
Battery status - shows the approximate battery charge level. Flashes
red when the battery is low and animates when charging.
12:00AM
12:00AM
1
2
1 2
1 2