AT&T EP5632/EP5632-2 User Manual

Page 94

Advertising

Answering system operations

NOTES:

1. If you pause for more

than four seconds

during remote access,

a help menu listing all

features and commands

will be announced. If no

commands are entered

for approximately 20

seconds, the call will

end automatically.

2. If memory is full, the

system will answer

after 10 rings, and

announce "Memory is
full, enter your remote
access code." Enter

your remote access

code to enter the

remote access mode.

Remote access
You can access your answering system remotely
by dialing your home telephone number from any
touch-tone telephone.
To remotely access your answering system:

1. Dial your telephone number from any touch

tone telephone.

2. At anytime when the answering system answers

the call, enter

5000 (default remote access

code, see page 53 to change this setting).

• If you have new messages, the system will

automatically announce the number of new
messages and then begin to play them.

3. Enter the following remote commands on a

touch tone phone.

Remote Command and Action

.....Plays all messages

.....Plays only new messages

.....Deletes the current message
(during playback)

.....Deletes all old messages

.....Repeats the current message
(during playback).

.....Press twice to hear the previous message.

.....Pause/resume message (during playback).

.....Hear a list of remote commands

.....Skips to the next message (during playback)

.....Records a new announcement

.....Turns the answering system on or off

.....To stop message playback

.....Save all undeleted messages

hang up

4. Hang up to end the call and save all

undeleted messages.

If desired, cut out the remote access wallet

card at the back of this user's manual for

quick reference.

Advertising

Popular Brands

Popular manuals