AT&T EP5632/EP5632-2 - Manual (Page 36)

32
System setup
Show Handset Name
By default, the handset name is shown on the
display when in idle mode.
To change this setting:
1. Press MENU/
SELECT
in idle mode to enter the
main menu.
2. Press the UP or DOWN Navkeys to select
Settings, then press
MENU
/SELECT to enter the
Settings menu.
3. Press the UP and DOWN NavKeys to highlight
Show Handset Name, then press
MENU
/SELECT.
4. Press the UP and DOWN NavKeys to highlight
On or Off, then press the SET softkey or
MENU
/
SELECT to save the setting.
NOTE: If you change this setting to off, it will only affect that
handset.
Keypad Tone
By default, the handset beeps when you press a key.
To change the keypad tone setting:
1. Follow steps 1 and 2 in the above section.
2. Press the
UP and DOWN NavKeys to highlight
Keypad Tone, then press
MENU
/SELECT.
3. Press the UP and DOWN NavKeys to highlight
On or Off, then press the SET softkey or
MENU
/
SELECT to save the setting.
Language
By default, the handset language is English. You
can select English, Spanish, or French to be used in
all screen displays.
To change the language setting:
1. Follow step 1 and 2 in the top section.
2. Press the
UP and DOWN NavKeys to highlight
Language, then press
MENU
/SELECT.
3. Press the UP and DOWN NavKeys to highlight
English, Español or Français, then press the SET
softkey or
MENU
/SELECT to save the setting.
Edit Handset Name
Show Handset Name
Keypad Tone
Language
LCD Contrast
Settings
Show Handset Name
Off
Show Handset Name
SET
P On
Off
Keypad Tone
SET
P On
Español
Français
Language
SET
P English