AT&T EP5632/EP5632-2 - Manual (Page 53)

49
System setup
Answering System settings
In the Answering System menu, you can set the
answering system on or off, change the outgoing
announcement, remote access code, the number
of rings, and the answering system message alert
tone. The answering system only answers incoming
HOME line calls.
To enter the Answering System menu:
1. Press the MENU softkey in idle mode to enter
the main menu.
2. Press the UP and DOWN NavKeys to select
Answering System, then press the SELECT
softkey to enter the
Answering System menu.
While in the Answering System menu, press the
UP and DOWN NavKeys to highlight one of the
items below, then press the
SELECT softkey.
• Answer On/Off - set the answering system
on or off (page 50).
• Announcement - review, record, or delete
the outgoing announcement (page 51).
• Record Memo - see page 89.
• Number of Rings - set the number of rings
before the answering system answers an
incoming call (page 52).
• Call Screening - listen to an incoming caller
leaving a message (page 53).
• Remote Code - change the remote access
code (page 53).
• Msg Alert Tone - set the message alert tone
on or off when you have a new answering
system message (page 54).
After a setting has been saved or set, you will hear
a confirmation tone and the display will return to
the
Answering System menu.
While in the Answering System menu:
• Press CANCEL to return to a previous menu
• Press and hold CANCEL on the telephone base
to return to the idle screen.
NOTE: To return to
a previous menu, press
CANCEL
.
To return to idle
mode, press and hold
CANCEL.
Main Menu
Directory
Call Log
Answering System
Select
Answering System
Answer On/Off
Announcement
Number of Rings
Select
NOTE: To learn
how to operate the
answering system, see the
Answering operations
section (page 86).