AT&T EP5632/EP5632-2 - Manual (Page 74)

70
Directory
Creating a new directory entry (continued)
Using the telephone base
1. Press the MENU softkey when the telephone
base is in idle mode.
2. Press the SELECT softkey to enter the Directory
menu.
3. Press the NEW softkey to create a new directory
entry.
4. Enter the name (up to 16 characters) by using
the dial pad ( 0-9). See the character chart on
page 68.
• Each time a dial key is pressed, the
characters on that key will be displayed in
the highlighted character in order of the
number of key presses. For instance, for
the letter a, press the
2 dial pad key five
times.
• Press the LEFT and RIGHT NavKeys to move
the cursor left and right.
• Press the ERASE softkey to backspace and
delete a highlighted character.
5. Press the DONE softkey to store the name.
6. Enter the telephone number (up to 32 digits) by
using the dial pad ( 0-9).
• Press the LEFT and RIGHT NavKeys to
move the cursor left and right.
• Press the ERASE softkey to backspace and
delete a highlighted digit.
• Press and hold # until a P appears on the
display to enter a two-second pause.
7. Press the DONE softkey when you are finished
entering the telephone number.
8. Press the SAVE softkey to store the entry.
–OR–
Press the
UP and DOWN NavKeys to highlight to highlight highlight
and edit the name or number (see steps 4 and
5), then press the
SAVE softkey to store the
entry.
NOTES:
1. Press CANCEL/
OFF
at anytime to discard any
changes and return to
the
Directory menu.
2. While creating or editing
an entry, if no keys
are pressed within 60
seconds, changes will
be discarded, and the
display will timeout and
return to idle screen.