Jenway 7315 Manual Italian User Manual

Page 44

Advertising
background image

44

SeCtion 9 – Kinetics

The kinetics measurement mode enables the absorbance or % transmittance of an active molecule to be
measured over a period of time; for example enzyme analysis of horseradish peroxidase. The absorbance
or % transmittance is measured at regular time intervals at a set wavelength over a period of time.
The results are plotted on a graph to show the change in absorbance or % transmittance over time.
Following sample measurement statistical analysis of all or part of the experiment can be performed.

9.1

MoDe SPeCiFiC PARAMeteRS

The kinetics minimal operating menu enables calibration
to zero absorbance and kinetics measurements to
be performed without changing any measurement
parameters or settings. Pressing the key adjacent to the
JW icon opens the expanded operating menu.

The kinetics expanded operating menu enables
measurement parameters to be changed. The utility
toolbar on the left hand side of the screen enables access
to printing, print setup options, results, methods and
autologging options. For more details on the different
functions of the utility toolbar refer to section 10.

The

settings icon enables the wavelength, units, resolution, graph y-axis, absorbance or % transmittance

operating mode, standard, factor, measurement time, lag time and start on level to be set. Following
the completion of a set of kinetics measurements the

statistics for all or part of the kinetics run can

be analysed. The

kinetics moving line function enables the initial and final points of the curve to be

selected, so that analysis of the area between these two points can be performed.

Fig 9.1.1 - Expanded Operating Menu – Post Measurement

Minimal Operating Menu

Expanded Operating Menu

3.000

ABS

-5.000

0.00

10.00

5.0

s

09:02

3.000

ABS

-5.000

0.00

10.00

5.0

s

09:02

3.000

ABS

-5.000

0.00

10.00

5.0

s

09:02

Print/print settings

Settings

Kinetics moving line

Statistics

Calibrate

to zero

Start kinetics

Measurement

Results selection menu

Method selection menu

Autolog menu

Advertising
This manual is related to the following products: