Jenway 7315 Manual Italian - Manual (Page 83)

Kinetics Start kinetics measurement
Kinetics Kinetics measurement in progress
Kinetics Sigma icon - Post measurement statistics
Kinetics Kinetics moving line
Kinetics Update factor in settings
Kinetics Toggle icon – switches between the initial and final point lines
Kinetics Double less than icon - Decrease the time by 5 seconds intervals
Kinetics Single less than icon - Decrease the time by 1 second intervals
Kinetics Double greater than icon - Increase the time by 5 seconds intervals
Kinetics Single greater than icon - Increase the time by 1 second intervals
Kinetics Data point interval – used in print settings
Accessories No single cell - Method created on a unit with a single cell accessory
fitted
Accessories 8 cell turret icon – the automatic 8 cell turret is in use
Accessories Error finding cell position 0 on turret
Accessories No turret - Method created on a unit with a turret accessory fitted
Accessories
°C
Degrees Celsius
Accessories
°F
Degrees Fahrenheit
Accessories Peltier accessory in use – current temperature is below set point.
The current temperature is displayed above set point temperature
Accessories No peltier - Method created on a unit with a peltier accessory fitted
Accessories Sipper pump in use – running in forward direction
Accessories Sipper pump in use – running in reverse direction
Accessories Timed sipper pump
Accessories Timed sipper pump calibration sequence
Accessories Start sipper pump – enables take up time to be set
83