Jenway 7315 Manual Italian User Manual

Page 56

Advertising
background image

56

10.7.1

Print Setup

To open the print setup menu hold the key adjacent to
the

printer icon for 2 seconds in the expanded operating

menu.

To select the language for the printouts press the key
adjacent to

English icon. Repeat pressing of the key

cycles the language between English, Français, Deutsche,
Espânôl and Italiano.

The destination of the printouts can be the internal printer or an external serial printer. The results can
only be sent to an external serial printer if there is a serial printer connected to the instrument via the
RS232 serial port. Press the key adjacent to the

computer icon to select the external serial printer. The

results can only be sent to the internal printer if there is an internal printer connected. To select the
internal printer for the printout destination press the key adjacent to the

printer icon.

Once the required printout destination and language has been selected press the key adjacent to the

tick icon to save and return to the expanded operating menu.

10.7.1.1 Print Setup – PHotoMetRiCS AnD ConCentRAtion

In the photometrics and concentration measurement
modes the print setup menu does not contain any
additional post analysis statistics.

10.7.1.2 Print Setup - SPeCtRUM

In the spectrum measurement mode print setup menu it is
possible to print off the

spectral points analysis table,

peaks and valleys data and absorbance or %T values
recorded at certain

data intervals. If the data interval is

set to 5 every 5th data point recorded is reported. If no
data is required the data interval can be set to zero.

To select the spectral points analysis table to be printed
press the key adjacent to the

spectral table icon. Repeat

presses of the key will cycle between a

tick and a cross

icon for selected or deselected. To select the peaks and
valleys data to be printed press the key adjacent to the
peaks and valleys icon. To select the data interval press
the key adjacent to the

data interval icon.

0.000

0.000

400

09:02

ppm

ABS

nm

English

English

English

1

English

1

Advertising
This manual is related to the following products: