Jenway 7315 Manual Italian - Manual (Page 81)

Instrument Diagnostics
Settings
Photometrics Measure sample
Photometrics Toggle icon – switches between ABS/%T
Concentration Settings menu
Concentration Measure to a factor
Concentration Measure to a standard
Concentration 0.000 ABS Calibrate to zero absorbance
Concentration
0.000
Calibrate to a standard
Concentration Calibrate to zero absorbance or standard
Concentration Factor menu
Concentration Standard menu
Concentration 000 Resets standard or factor value to zero
Concentration Check standard
Spectrum Scan settings menu
Spectrum Hand icon – Manual y-axis scaling
Spectrum Hand icon with cross through it - Auto y-axis scaling
Spectrum Scan interval
Spectrum Baseline scan
Spectrum Baseline scan in progress
Spectrum Scan sample
Spectrum Sample scan in progress
Spectrum Peaks and valleys threshold turned off
Spectrum Peaks and valleys above threshold 5% are shown
Spectrum Peaks and valleys table
Spectrum Show peaks only
Spectrum Show valleys only
Spectrum Spectral points analysis
Spectrum Double less than icon- decrease the wavelength by 10 times scan interval
81