KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 18)

3
INSTALLATION FOR FLOW MEASUREMENT
18
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
First time use
First time use, program the units in the converter
If you use the converter for the first time, it will prompt you for the unit setting automatically.
Otherwise go to menu number 2.4.1 ("Measurement  Setup  Units").
Choose in each line the required unit with the buttons as shown in the next table.
Navigate through the menu
When editing, only the Back and Forward buttons are functional:
INFORMATION!
FIRST TIME USE:
FIRST TIME USE: FIRST TIME USE: FIRST TIME USE:
When the UFC 300 P converter is started for the first time, the startup menu will be shown. In
this menu, set the language, time and date.
To show the menu again at the next startup, select "Settings and information  Device  Start-
up sequence?  Yes".
Menu
Language English
Time and date
Units
Continue
13-04-2010 14:11:09 13 MB free
 Back Back one page
∧ Up Up one line
∨ Down Down one line
 Forward Enter item to edit or to select it
 Back Delete previous character or leave item
unchanged when at position one
 Forward Move cursor right, accept item when at
last position