KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 55)

OPERATION
6
55
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
6.3 Data logging
The measured data can be logged with the converter. The function of the data logger is explained
in this chapter.
6.3.1 Step 1: how to set up the data logger
• Go to menu 2.4.4 with the logger button on the converter or via "Measurement  Setup 
Logger.
• Select Logger setup.
• Filename: Set a filename in which the logged data will be stored. The filename can have a
maximum of eight characters, do not use the underscore character (_).
Figure 6-2: Location of keys
1 Logger key
2.4.4
Start/stop logger now
Set start time
Set stop time
Arm/disarm logger
Logger setup Logger setup Logger setup Logger setup    
13-04-2010 14:11:09 13 MB free
INFORMATION!
It is advised to use the same name for the site file as for the data logger file.
2.4.4.5
Filename Filename Filename Filename    
Parameters
Sample interval
Event logging
View log in screens
12345678 12345678 12345678 12345678
All
60 s
13-04-2010 14:11:09 13 MB free