KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 58)

6
OPERATION
58
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
6.3.2 Step 2: how to start data logging
Data logging can only be done in the measurement mode.
Start logger now:
Start logger now: Start logger now: Start logger now:
To start / stop the logger directly, select Start/stop logger now.
Start logger later:
Start logger later: Start logger later: Start logger later:
To start the logger later, set a start and/or stop time and date for the logger. Then arm the
logger. The logger will start/stop at the set date and time.
6.3.3 Step 3: how to view logged data
With the UFC 300 P it is possible to view logged data. This is only possible for one logged
parameter at the time.
"View logged data", , choose saved file. Press 
Choose a parameter and change the percent of the scale for viewing as required. Press "Next".
A graph is displayed.
With the keys  and  zooming on the time scale axis is possible. The actual level of zooming is
shown in the upper left corner as a percentage and through the bar on the time scale. After
zooming in the 4 and 6 keys can be used to step to the beginning or the end of the data. The 1 and
3 key can be used to step backwards and forwards through the data.
2.4.4
Start/stop logger now 
Set start time
Set stop time
Arm/disarm logger
Logger setup Logger setup Logger setup Logger setup    
13-04-2010 14:11:09 13 MB free
2.4.4
Start/stop logger now 
Set start time Set start time Set start time Set start time    
Set stop time
Arm/disarm logger
Logger setup
13-04-2010 14:11:09 13 MB free logging
View logged data
Select log file
Select parameter 
13-04-2010 14:11:09 13 MB free