KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 30)

3
INSTALLATION FOR FLOW MEASUREMENT
30
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
3.4.5 Connect the sensor cable
Figure 3-16: Connecting signal cables
1 Connector for "UP" transducer (blue)
2 Connector for "DOWN" transducer (green)
1 2 3
4 5 6
7 8 9
+/- 0 EXP
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
A/a -
I/O
DISPLAY
LOGGER
MENU
1
1
2
2
1
2
INFORMATION!
After mounting the transducers in the proper position, it takes up to 60 seconds to find a signal.
INFORMATION!
The signal strength is given and can be qualified as shown:
Signal strength Qualification
> 75% High signal
50...75% Fairly high signal
10...50% Low signal
< 10% Bad or no signal
Check settings in menu, change transducer distance
until there is at least a low signal.