KROHNE OPTISONIC 6300 P-6400 EN - Manual (Page 36)

4
INSTALLATION FOR ENERGY MEASUREMENT
36
OPTISONIC 6300 P
www.krohne.com 03/2013 - 4000972603 - MA OPTISONIC 6300 P R03 en
4.2 Mechanical installation
Mounting of temperature sensors
The delivered PT 100 sensors are clamp-on elements. Clamp them on the pipe with the hose
clamp.
If the temperature sensors on the pipe have temperature transmitters 4...20 mA it is possible to
make use of the standard I/O box.
• Connect the PT 100 elements to the I/O box according to the sticker on the I/O box.
INFORMATION!
Mount the temperature sensors close to the rail for flow measurement. All cables have a fixed
length!
Figure 4-2: Mounting PT 100 with hose clamp
1 PT 100 temperature transmitter
2 Hose clamp