Thermo Fisher Scientific Alpha COND 2000 (In the process of updating the brand guideline & product image) User Manual
Page 4
Safety Information
This Eutech Instruments Controller/ Transmitter shall be installed and operated only in the manner
specified in the Instruction manual. Only skilled, trained or authorised person should carry out
installation, setup and operation of the instrument.
Before powering up the unit, make sure that power source it is connected to, is as specified in the top
label. Failure to do so may result in a permanent damage to the unit.
The unit has live and exposed parts inside. If it has to be opened, make sure that the power to the unit
is off and disconnected.
The unit is Fuse protected. In the event the fuse has to be replaced, use only those as specified in the
manual.
The degree of protection against electric shock will be achieved only by observance of the
corresponding installation rules.