West Control Solutions SG 45 - Manual (Page 5)

. 1 General
Thank you very much for buying a transmitter for load cells, strain gauges, and melt pressure sensors UNIFLEX SG 45 .
The UNIFLEX SG 45 transmitters are suitable for precise, cost-efficient contol tasks in all industrial applications.
Every SG 45 is equipped with a strain gauge signal input, an universal output and two relays. Optionally the tranmitter
can be fitted with various interfaces.
Galvanic isolation is provided between inputs and outputs as well as from the supply voltage and the communica -
tion interfaces.
Applications
CI 45 is used for measurement, scaling of electrical signals, e.g. for
· Strain gauges
· Load cells
· Melt pressure sensors
· Pressure sensors
...
At-a-glance survey of advantages
Compact construction, only 22,5 mm wide
Clips onto top-hat DIN rail
Plug-in screw terminals or spring clamp connectors
Dual-line LC display with additional display elements
Process values always in view
Convenient 3-key operation
Ability for wireless cross-communication with other units mounted on top-hat rail
Strain gauge input with high signal resolution (>15 bits)
Universal output with high resolution (14 bits) as combined current / voltage output
Quick response, only 50 ms cycle time, i.e. also suitable for fast signals
Two relay outputs
Customer-specific linearization
Tare function
Min/max indicator (‘slave pointer’)
Logical linking of digital outputs, e.g. for common alarms
Preset for output value
Further documentation for DMS Messumformer SG 45:
– This operating manual 9499 040 82318
– Data sheet SG 45 9498 737 57333
– Operating note SG 45 9499 040 82441
– Interface description 9499 040 72018
General
SG 45 5