Badger Meter M-Series M3000 - Manual (Page 19)

19
PASSWORD ENTRY
With your Main Screen showing on the display, switch or
press E. Screen PASSWORD??? 01 opens.
PASSWORD??? 01 is a typical Input Numbers screen.
If a password has been entered into your program, this
screen opens (reference page 23, "Input a Password" for
programming a password).
An underscore ( _ ) is positioned under the fi rst 0.
1. Switch or press + to increase the number by one
digit. Switch or press - to decrease the number by
one digit.
2. After the correct number is entered for that digit,
press E to move the underscore to the next 0.
3. Repeat the number selection process for this and
all the 0’s.
4. After the last number is entered, press E.
5. The MAIN MENU appears.
However, if the wrong password was entered:
Screen INVALID PSWD 02 opens.
1. Select +, - or E to return to the Main Screen.
2. Press E again.
3. The screen returns to PASSWORD??? 01. Enter
the correct password as described above.
All passwords are factory set to 0000 (no password is
programmed or required). If 0000 is the password, pressing E
from the Main Screen opens the MAIN MENU screen.
Amplifi er Access Switches/Buttons
Accessing amplifi er menus, movement to and between
screens, parameter selections and settings are all
accomplished by pressing the +, - and E magnet operated
switches or push buttons in conjunction with an on-screen
location arrow.
Switch/Buttons (+ and -)
Select/Press + to:
· move text up by one line, relative to the on screen
arrow, for each select/press when choosing menu
or sub-menu list names
· move text up by one line, relative to the arrow, for
each select/press when selecting a parameter
setting from a list
· increase a number by one digit for each select/
press when inputting parameter numeric settings
Select/Press – to:
· move text down by one line, relative to the on
screen arrow, for each select/press when choosing
menu or sub-menu list names
· move text down by one line, relative to the arrow,
for each select/press when selecting a parameter
setting from a list
· decrease a number by one digit for each select/
press when inputting parameter numeric settings
E Switch/Button
Select/Press E to:
· To enter (open) a menu or sub-menu topic at which
the arrow is pointing.
· Select between ON/OFF parameter settings for
each select/press.
· Move the parameter numeric setting underscore
( _ )one place to the right for each select/press
when inputting parameter numeric settings.
· SAVE a parameter numeric setting. After all
numbers are input, press E and the setting is
saved, the screen closes and the previous screen
with the arrow pointing at "Exit this Menu" shows
again. Select E again. That screen closes and the
previous screen appears with the arrow pointing at
its “Exit this Menu”.