Badger Meter M-Series M3000 - Manual (Page 20)

20
· Continue selecting E to return to the Main Screen.
· If your amplifi er is not password protected, pressing
E from the Main Screen accesses the MAIN MENU.
The MAIN MENU is a list that provides access to all
amplifi er menus and parameters.
· If your amplifi er is password protected and E is
pressed from the Main Screen, the PASSWORD
screen opens (reference PASSWORD??? 01,
below).
How to Program
Amplifi er screens, menus and program parameters are
arranged in the familiar “branching” format where the MAIN
MENU screen is a list of selections. The Main Menu list
provides access to other lists, selections or parameter
screens which provide input for meter programming.
The amplifi er program uses three types of screens; a List
screen, an Input Numbers screen and a select ON or Off
screen.
MAIN MENU 00
----------------
>Exit this Menu
Meter Setup
Measurements
Inputs/Outputs
Clear Totals
Communications
Info/Help
Logout
l
Sample List Screen
Sample Input Numbers Screen
Sample Select ON or OFF Screen
The following pages introduce you to the screen formats,
describe how to maneuver to and through them and provide
some specifi cs about programming terminology and
parameters.
If possible, have access to your amplifi er display and controls
and perform these screen manipulations.
MAIN MENU
The MAIN MENU contains a list of eight selections and
an “Exit this Menu” choice. All amplifi er programming and
parameters are accessed from this list.
MAIN MENU 00
----------------
>Exit this Menu
Meter Setup
Measurements
Inputs/Outputs
Clear Totals
Communications
Info/Help
Logout
l
Only four lines of text are visible on the display screen.
Operating the + and – switches/buttons moves text up or
down and into view.
When an item from the list on the MAIN MENU is selected,
(press E when the item is in line with the arrow) either a
screen opens that requires an action such as select a size
or numeric unit for a parameter, turn a parameter on or off,
etc. or a screen with another list may open requiring another
selection be made to access and set a specifi c parameter
size, numeric unit or on/off confi guration.
Each screen has a name and number that displays at the
top of the screen. Write down screen names, numbers
and parameters that you access and change should other
changes be needed later.
NOTE: Your metering requirements may not require the use
of all screens, options and parameters.
MAIN MENU 00 is a typical List screen. It provides access
to parameter screens.
The MAIN MENU is a list of eight selections and an “Exit this
Menu” choice. All amplifi er programming and parameters are
accessed from this list.
1. Press + or – to position the arrow at a selection.
2. For example, press + once to place the arrow at Meter
Setup.