Badger Meter M-Series Field Verification Device - Manual (Page 12)

Page 12
8-11
Field Verification Device
Display and Keypad
Display
The display is a backlit LCD and displays the current date and time, percent of battery charge and menu indications.
Keypad
The keypad consists of 9 function keys, 12 numeric keys and the On/Off key.
Figure 10: Verification Device Functions
Power Key
The On/Off power key on the lower right applies or removes power to the Device.
Function Keys
The two (2) top soft keys on the left and right side of the up arrow key provide menu access, wet or dry detector selection.
The up, down, left and right arrow keys provide menu navigation.
The OK key confirms a menu selection.
The Alt key provides no function.
The outlined left arrow is the back or delete key.
Alpha-Numeric Keys
The primary purpose of the alpha-numeric keys is for entering the serial number of a meter if it is not automatically
recognized by the internal firmware or external software. They are also used for Test ID entry.
D-25 Harness Connector
Display
Function Keys
Alpha/Numeric Keys
Power Key
AC Power Connector
USB Connector