Badger Meter M-Series Field Verification Device - Manual (Page 21)

Page 21 8-11
User Guide
PC Software
Installation of the PC Software
Insert the software CD, open setup.exe and follow the instructions. An icon on the Desktop will be installed named
Verification Device.
Download of the Verification Tests
1. Start the PC program by clicking the Verification Device icon on your desktop.
2. Connect the Verification Device via the USB cable to the PC and switch the device On. The display on the device
shows USB Mass Storage.
3. The following PC window will be opened automatically. Select the device and click OK. If the window will not open
click FILE and OPEN (Ctrl+O) in the upper task bar.
4. The measurements automatically download to the PC. You will be asked if the measurments which are on the
Verification Device should be deleted or not.
YES NO