Badger Meter M-Series Field Verification Device - Manual (Page 14)

Page 14
8-11
Field Verification Device
Verification Device Settings
Press the On/Off button on the Device and wait for the SelfTest to complete. This takes a few seconds.
After the SelfTest, the display shows date, time, battery capacity and firmware version. Check to make sure the date and time
are correct because the test reports are stored and printed with this data.
When the Start Menu appears, press the upper left function key.
Language
1. Select StartMenu > Menu User > Settings > Misc > Language using the upper right function key.
2. Select the appropriate language. (The default language is English.)
Date
1. Select StartMenu > Settings > Misc > Date.
2. Edit the day, month and year in the edit box by using the numeric keypad. Use the right arrow key to move the
cursor.
3. Confirm the new date with the upper right function key.