Disclaimer, Questions or service assistance, Product identification information – Badger Meter M-Series Field Verification Device User Manual
Page 5: Terminology, About the field verification device
Page 5
8-11
User Guide
Disclaimer
The user/purchaser is expected to read and understand the information provided in this manual, follow any listed safety
precautions and instructions and keep this manual with the equipment for future reference.
The information in this manual has been carefully checked and is believed to be entirely reliable and consistent with the
product described. However, no responsibility is assumed for inaccuracies, nor does Badger Meter, Inc. assume any liability
arising out of the application and use of the equipment.
Should the equipment be used in a manner not specified by Badger Meter, Inc., the protection provided by the equipment
may be impaired.
Questions or Service Assistance
If you have questions regarding the product or this document contact:
Badger Meter, Inc.
P.O. Box 245036
Milwaukee, WI 53224-9536
Telephone: 414-355-0400, 800-876-3837
Fax: 888-371-5982
Web site: www.badgermeter.com
or call your local Badger Meter representative.
Product Identification Information
Record the product identification numbers from the nameplate.
Modular Mag Meter
Model Number M5000____________________
Serial Number __________________________
Tag Number ____________________________ (if applicable)
Terminology
Throughout this manual, references to “Field Verification Device” may be otherwise be indicated as “Device.”
About the Field Verification Device
Field Verification Device is a portable test device for the Badger Meter M-Series® of electromagnetic flowmeters. The M2000
and the M5000 meters can be tested using this device.
With the Field Verification Device, accurate verification of meter functionality is assured without taking the meter out of the
pipeline ("wet" test) and interrupting functionality. Meter diagnosis and calibration can be performed on site. A "dry" test
(removing the meter and bench testing) can also be performed. The complete verification test consumes approximately 20
minutes and results can be downloaded to a Microsoft Windows® personal computer.