Asante Technologies 6200 - Manual (Page 100)

Viewing Current Operating Information
Page 6-3
Table 6-1 General Information Menu Parameters
Setting Description
Running Image Version/Date The version and compilation date of runtime
code that is currently running on the unit.
Bank 1 Image Version/Date The version and compilation date of runtime
code that is stored in Bank 1.
Bank 2 Image Version/Date The version and compilation date of runtime
code that is stored in Bank 2.
Switch Name The name assigned to the IntraSwitch.
Switch Location The physical location of the IntraSwitch.
Switch Contact Name of the person responsible for the unit.
DRAM Size The size, in megabytes (MB), of the unit’s
Dynamic Random Access Memory.
Flash Size The size, in MB, of the IntraSwitch flash
memory. Flash memory is non-volatile RAM.
EEProm Size Size, in kilobytes, of the unit’s EEPROM.
Console Baud Rate The current setting of the console port’s baud
rate/speed.
MAC Address The IntraSwitch’s hardware address.
Note: This address cannot be changed.
IP Address The units’s IP (Internet Protocol) address.
Subnet Mask The IntraSwitch’s IP subnet mask.
Router The IP address of the default gateway router to
which the IntraSwitch belongs.
Boot Load Mode The current method the unit is using to load
its software.
TFTP Server The IP address of the TFTP server configured
for the IntraSwitch.
Boot File Name The name and network path of the
IntraSwitch’s software file.
6216M Book Page 3 Wednesday, January 27, 1999 5:26 PM