Asante Technologies 6200 - Manual (Page 76)

Forwarding Database/Security Configuration
Page 5-29
Table 5-9 Security Configuration Menu Settings
Displaying the MAC Address Table
The MAC address table can be displayed with or without IP
addresses. To view the MAC address table:
1 Open the Forwarding DB/Security Con-
figuration Menu by typing f in the Configu-
ration Menu.
2 Type f to display the MAC address table with
MAC addresses and corresponding ports.
Type i to display the MAC address table with
MAC addresses, their corresponding IP
addresses, and corresponding ports.
∆
Note: The Age field in the MAC address
table is the time to be aged out of the
entries.
∆
Note: Self in the port number column rep-
resents the Switch MAC address and IP
address.
Setting Description
Duplicated-
IP Trap The status of the Duplicated-IP Trap.
Enabled — IntraSwitch logs the duplicate IP address along with
the owner and spoofer MAC address in the trap log which can be
displayed using the l command in the Forwarding Database/
Security Configuration menu, and also sends a trap to the
receiving trap stations if a duplicate IP address is detected.
Disabled — the duplicate-IP Trap is disabled. The IntraSwitch does
NOT send a trap if a duplicate IP address is detected.
Age-Out
Time The current age-out time for retaining addresses in the table (the
default is 300 seconds).
This is the number of seconds an address remains in the table
after it is learned by the IntraSwitch.
MAC
Address
Count
The number of entries currently in the MAC Address Table.
IP Address
Count
The number of entries in the MAC Address Table that contain a
corresponding IP address.
6216M Book Page 29 Wednesday, January 27, 1999 5:26 PM