Asante Technologies 6200 - Manual (Page 67)

Console Management
Page 5-20
The trap receiver entry is added.
To return to the Configuration Menu, type q.
Deleting a Trap Receiver
To delete a trap receiver entry:
1 Open the SNMP Configuration Menu by typ-
ing
n in the Configuration Menu.
2 Type d to Delete a Trap Receiver .
3 Type the number of the receiving network
management station entry to be deleted,
then press
Return .
The trap receiver entry is deleted.
To return to the Configuration Menu, type q.
Port Configuration
This menu allows you to manually configure each of the
IntraSwitch’s ports and any installed MII expansion modules for
speed, connection, link mode, and auto-negotiation.
It also provides an overview of the entire IntraSwitch system’s
port operating status. The Advanced Port Configuration option
“v” allows you to configure ports BC filtering and its auto-
negotiation advertisement.
The default parameters for each of the IntraSwitch’s ports are:
❏ auto-negotiation — enabled; auto-negotiates to
10 or 100Mbps half or full duplex
To access the Port Configuration Menu, type p in the
Configuration Menu. A screen similar to Figure 5-9 appears.
6216M Book Page 20 Wednesday, January 27, 1999 5:26 PM