Asante Technologies 6200 - Manual (Page 117)

Advanced Management
Page 7-10
Configuring
STP Port
Parameters
The Spanning Tree Port Configuration Menu allows you to
configure and manage the STP parameters of each port on the
IntraSwitch.
▲
Important! You should NOT configure any
STP port parameters unless you have experi-
ence with the IEEE 802.1d specification.
To configure the STP Port Parameters:
1 Type c in the Spanning Tree Configuration
Menu.
The STP Port Configuration Menu appears,
similar to Figure 7-2.
Figure 7-2 Spanning Tree Port Configuration Menu
2 Type s to select a port number.
3 Type o to set the port priority value for the
port.
4 Enter the port priority value, then press
Return
.
∆
Note: See Table on page 7-11 for a description
of port priority.
Current Settings
6216M Book Page 10 Wednesday, January 27, 1999 5:26 PM