Rack mounting/ desktop placement, Equipment rack installation, Rack mounting/desktop placement -3 – Asante Technologies 6200 User Manual
Page 28: Figure 2-1, Intraswitch rack installation -3, Table 2-1, Installation overview -3
Rack Mounting/Desktop Placement
Page 2-3
Table 2-1
Installation Overview
Rack Mounting/
Desktop
Placement
The IntraSwitch can be installed in a standard 19-inch
equipment rack. It can also be placed on a stable horizontal
surface with support capabilities of 12 pounds (5.4 kilograms).
Equipment Rack
Installation
To install the unit in an equipment rack, use the following
procedure. Refer to Figure 2-1 below.
Figure 2-1
IntraSwitch Rack Installation
Step
Action
1
(required)
Open the box and check the contents.
See “Package Contents” on page 1-7 for a complete
list of the items included with your IntraSwitch.
2
(optional)
Install MII expansion module(s), if any.
See “Installing MII Modules” on page 2-5.
3
(required)
Install the IntraSwitch in an equipment rack or prepare
it for desktop placement.
See “Rack Mounting/Desktop Placement” on page 2-3.
4
(required)
Connect the power supply.
See “Connecting Power” on page 2-6.
5
(required)
Connect network devices to the IntraSwitch.
See “Connecting to the Network” on page 2-6.
6
(optional)
Configure the IntraSwitch for management
capabilities.
See “Configuring for Management” on page 2-8.
1
3
5
7
Switched 10/100Mbps Ports
Console
Power
100Mbps
FDP
Data
Link
Utilization
24
9
11
2
4
6
8
10
12
13
15
17
19
21
23
14
16
18
20
22
24
>1
3
5
10
25
50
75
90<
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
1
IntraSwitch 6224
6216M Book Page 3 Wednesday, January 27, 1999 5:26 PM