Asante Technologies 6200 - Manual (Page 23)

Introduction
Page 1-8
❏ (2) rack-mounting brackets
❏ (16) standard Phillips screws
❏ (1) MII cover bracket (IntraSwitch 6216M)
❏ (4) Self-adhesive rubber feet)
❏ (1) User’s Manual (this book)
❏ (1) Registration Card
❏ (1) Quick Install Card
▲
Important! If you are missing any of the items
listed above, contact the dealer from whom you
purchased the unit.
Tools and
Materials
Some tools and materials that are not supplied with the
IntraSwitch are needed to connect it to an Ethernet network.
The table below lists the tools and materials required for
connecting devices to the IntraSwitch’s ports and for rack-
mounting the unit.
∆
Note: For specific instructions on connecting
network devices to the IntraSwitch, see “Connect-
ing to the Network” on page 2-6.
Table 1-1 Tools and Materials Required
Action Tool/Material Required
Connecting 10/100
ports
Standard Category 5 UTP straight-through
cable with RJ-45 connectors.
Standard Category 5 UTP cross-over cables
with RJ-45 connectors.
Connecting 100Base-
FX port (optional MII
module)
Dual 62.5/125 micron graded-index
multimode fiber-optic cable fitted with SC
connectors.
6216M Book Page 8 Wednesday, January 27, 1999 5:26 PM