Transmille 1000-Series - Manual (Page 104)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 104
Checking the COM Port setting for the USB Interface
Once the USB interface driver is installed, it will have assigned a ‘virtual’ COM port
number which is needed for setting up the instrument for computer control (via
optional ProCal Calibration software). To determine the COM port number, follow
the steps below :
Open Windows Control Panel
Select the SYSTEM icon
Select the Hardware tab, then click the
Device Manager button
Select Ports (COM & LPT) - the virtual
COM Port number assigned is shown in
brackets