Transmille 1000-Series - Manual (Page 15)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 15
Output Connections
Warning: Risk of shock.
High voltages may be present on the output sockets.
Output sockets are 4mm safety type, the voltage pair contacts are low thermal gold
plated for minimum thermal EMF.
The 1000 series calibrator’s outputs have been designed to allow most multimeters
to be calibrated without changing connections. There are 4 sets of outputs:
1) Voltage, Resistance, Capacitance, Frequency.
2) Current to 1A.
3) High 10A Current.
4) Thermocouple Output
The Voltage and Current terminals share a single common terminal. This allows the
1000 series to connect directly to all inputs on typical multimeters without the need
for changing leads as below:
When an output terminal pair is not active they are completely open circuit and
isolated from the other outputs.
Note: When outputting resistance, capacitance and frequency the calibrator will use
the voltage output terminals.