Canon VB-M700F - Manual (Page 115)

115
Bac
k
up
8
Restoring from Backup Data
Use the following procedure to restore a Storage Server
from backup data:
See “Stopping the Storage Server”(p. 115) for details
on how to stop the Storage Server.
The following folder is used by default:
Configuration file path
<System drive>:\ProgramData\Canon\WebView\
NVR30\
<System drive>:\Users\<user name>\AppData\Local\
Canon\WebView\NVR30\
The following folder is used by default:
<Destination drive>:\Canon-NVR\videofiles\
The following folder is used by default:
<Destination drive>:\Canon-NVR\eventfiles\
„ Stopping the Storage Server
The Storage Server runs in the background as a Windows
service. When you restore backup data, you must follow
the following steps to temporarily stop the Storage Server.
Double-click [RM-Lite Storage Server].
Note
To restart the Storage Server, follow the same steps and click
[Start] in step 6.
How to Restore a Backup
1 Prepare a new Storage Server for the restore.
2 Install this software.
3 Stop the Storage Server.
4 Restore the configuration file for this software to its
original location.
5 Restore the recording files to their original location.
6 Restore the event files to their original location.
7 Start the Storage Server.
8 Make sure that recording is performed correctly. Also
make sure that the restored recording data plays back
correctly.
Important
If the [Ensure video is kept for upto] option is set on the
[Servers] tab in the [Settings] dialog box, any restored
recording data that exceeds the specified storage period will
be deleted when the Storage Server starts.
1 Click [Start] > [Control Panel].
2 Click [System and Security].
3 Click [Administrative Tools].
4 Double-click [Services].
5 Double-click [RM Storage Server] to display [RM
Storage Server Properties].
6 Click [Stop].
7 Click [OK] to close the properties.