Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 11)

x
Contents
A Adaptec RAID Configuration Utility (ARC)
Overview A-1
Using the ACU A-2
Creating Arrays A-2
Managing Arrays A-4
Initializing Drives A-7
Rescanning Drives A-8
Using SATASelect and SCSISelect A-9
Controller Configuration Options A-10
SATA Configuration Options A-12
SCSI Configuration Options A-13
Using the Disk Utilities A-15
Viewing the Event Log A-16
B ACU for DOS
Introduction B-1
Creating the ACU Utility Disk B-1
Running the ACU Interactively B-2
Running the ACU Using Scripts B-3
Playback Mode B-4
Record Mode B-4
Creating the Script File Manually B-5
Array Definition Block Keywords B-6
Channel Definition Block Keywords – SCSI only B-12
ACU Error Codes B-13
Example – Running the ACU with a Script B-14
C Adaptec Flash Utility (AFU)
Introduction C-1
System Requirements C-2
Compatibility C-2
Firmware and UFI File Locations C-3
Creating the Firmware Floppy Disks C-3
Running the AFU from the GUI C-4