Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 116)

D-13
Command Line Interface
■ Root Special File (Unix/Linux only)—File associated with
the array and created by the OS after array creation. Appears in
the Num Label column.
■ Array Number —ID of an array (0 to 63).
■ Array Label —Name assigned to an array. Not automatically
assigned. Appears in the Num Label column.
■ Array Type —Defines an array as a volume, RAID 0, RAID 1,
etc., or a reconfigured array.
■ Creation Date —Month, day, and year the array was created.
■ Creation Time —Hour, minute, and second the array was
created.
■ Total Size —Number of bytes in an array. The size of an array
is the size of the available space when the array was created,
reconfigured, or extended.
■ Stripe Size —Number of bytes in a stripe (amount of data
written to a partition before the I/O data stream switches to the
next partition/array).
■ Read Only —Reports whether an array is read-only accessible.
An array can be set to read-only if not in use by an application.
■ Read/write —Reports whether an array is read-write accessible.
■ Lock —Reports whether an array is locked into volatile memory
space on the currently open controller.
■ Resident File System —Type of file system, if any, that resides
on an array. Appears in the Usage column.
■ Multipartition Container —That a file system resides on a
multipartition array. Appears in the Usage column.
■ UNIX opened —There is a mounted file system on the array.
■ Unknown File System —There is an unknown file system on the
array.
■ Unmapped Containers —The array is unusable and cannot be
mounted.
■ Phantom Container —The RAID controller software cannot
configure the array or the array is offline.
■ Valid Container —The OS recognized the array and there has
been a query (such as mount, fdisk, read, or write) on the array.