Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 89)

B-11
ACU for DOS
Type Keyword
Type is a required keyword, indicating the array type. There is no
default value. The Type keyword values are:
Note: For information about which array types your controller
supports, see Controller Features on page 1-5 .
Wait Keyword
Wait is an optional keyword that you can use to tell the ACU to
allow the ACU to continue while the build/verify or clear
completes in the background; specify wait=no. Otherwise, the
ACU waits by default.
Note: If the host is powered off before the build/verify or clear
process completes and is then restarted, the process resumes
without any user intervention.
Examples
Wait=Yes
Wait=No
WriteCache Keyword
The WriteCache keyword indicates whether write caching is used
for this array if write caching is supported for the system. Possible
values are as follows:
■ Yes (the default)—Enable the write cache.
■ No —Disable the write cache.
Note: Setting an array’s WriteCache keyword to Yes might
result in data loss or corruption during a power failure.
Example
WriteCache=Yes
■ Volume ■ RAID5
■ RAID0 ■ RAID10
■ RAID1 ■ RAID50