Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 117)

D-14
Command Line Interface
■ Mirror Set Create —Creation of a RAID 1 (mirror).
■ Mirror Set Normal —The RAID 1 is in the normal state.
■ Reconfiguration Copy Container —An array is being used as a
copy (hidden) array (Copy).
■ Reconfiguration Destination Container —An array is being
used as a destination (hidden) array (Dest).
■ Reconfiguration RAID 5 Set —An array is being used as a
RAID 5 (hidden array).
■ Reconfiguration Source Container —An array is being used
as a source (hidden) array.
■ Reconfiguration Temporary Container —An array is being
used as a temporary (or hidden) array (Temp).
■ RAID 5 Set Unprotected —Creation of a RAID 5 (Unprot).
Example
AAC0> container list
Executing: container list
Total Oth Stripe Scsi Partition
Label Type Size Ctr Size Usage C:ID:L Offset:Size
----- ----- ----- --- ------ ------- ----- ------------
0
Volume 30MB None 0:01:0 64KB: 15MB
Venus 02 64KB: 15MB
Container Show Cache
The container show cache attributes are defined as follows:
■ Global Container Read Cache Size —Number of blocks
dedicated to the read cache.
■ Global Container Write Cache Size —Number of blocks
dedicated to the write cache.
■ Read Cache Setting —Reports whether the read cache is
enabled.
Example
AAC0> container show cache 0
Executing: container show cache 0
Global container Read Cache Size
: 5345280
Global container Write Cache Size : 63332352
Read Cache Setting
: ENABLE
Write Cache Setting : ENABLE
Write Cache Status : Active, cache enabled